The rubber bale cutter is designed for use in the tire industry ,rubber conveyor belt industry and other rubber products . This rubber cutting equipment is applied to cut raw material into small pieces for plasticating and mixing, it is suitable for natural rubber ,synthetic rubber ,reclaimed rubber and plastic material .
The Rubber Bale cutter machine mainly consists of cutter , rack , hydraulic station ,machine base ,electrical cabinet ,etc, it is widely placed near the rubber kneader machine , cutting big rubber material into small pieces for next step . Rubber Bale Cutter is used to cut synthetic or natural rubber bales in pieces for further processing in Mixing Mill, Kneader and Banbury machines.
When you need cut the material , just put the material into feeding roller , and feeding roller will feed the material under the knife , then press the motor button in cabinet , knife will fall down and cut the material.
Specification
| Type |
Width (mm) |
Stroke (mm) |
Diameter of the piston (mm) |
Time Taken by the Stroke (second) |
Power (KW) |
Overall Dimension (LxWxH) |
Weight (kg) |
| SMP-8 |
660 |
680 |
150 |
16~25 |
5.5 |
1900×720×2580 |
1500 |
| SMP-10 |
1000 |
1000 |
150 |
10~16 |
7.5 |
2240×720×2580 |
1800 |
| SMP-12 |
1000 |
1200 |
150 |
10~16 |
7.5 |
2540×750×2880 |
2000 |
How Does Rubber Bale Cutter Work?
The high-precision hydraulic-powered rubber bale cutter are used to cut rubber into pieces as per speicific needs. The rubber bales or block can be fed through the machine. These rubber piece cut travels through the rubbe bale cutter machine which ensures smooth movement.
1. Check blade is in the up position.
2. Open the gate.
3. Place slab of rubber along the cutting edge.
4. Leave the cage area and close the gate.
5. Press the cut button to lower the blade to cut the rubber slab.
6. Blade rises after the cut sequence; wait until the blade is fully up.
7. Open the gate to remove the cut pieces.
8. Repeat the cycle.
A Wide Of Application
The Simptek Rubber Bale Cutter is very flexible and is is used for cutting all kinds of large sized natural rubber or synthetic rubber products, such as large plastic tubes, film, rubber lumps, and sheet materials , it is also very applicable for other plastic ,polymer,silicone including:
Silicone
Nitrile Bale
NBR
FKM
CR
HNBR
ACM
EPDM
SBR
EVA
Bench bale cutter
Slicing type
Cross blade type
And many more…
